41
D-Link DWR-116 User Manual
Section 3 - Configuration
Select this box to
Enable
the filter.
You may select
Always. On
or choose the
number of a schedule rule that you have
defined.
Copies the predefined filter to the specified ID
Identifies the filter.
Specify the local IP address
Specify the local port after the colon.
Specify the remote IP address
Specify the remote port after the colon.
Select this box to enable the filter.
Specify the schedule rule number.
Go back to the previous filter page.
Advance to the next filter page.
Click
Save.Settings
to save your changes,
or click
Don’t.Save.Settings
to discard your
changes.
Inbound Filter
Inbound Filter:
Use Schedule
Rule:
Copy to ID:
ID:
Source IP :
Source Ports:
Destination IP :
Destination Ports:
Enable:
Schedule Rule #:
Previous Page:
Next Page:
Inbound.Filter
enables you to control what packets are allowed
to pass through the router. Inbound filter only applies to packets
that are destined for Virtual Servers or DMZ hosts.
