5
D-Link DWP-902 Quick Install Guide
EN
G
LI
SH
A. Attach the grounding wire to the DWP-902
using the included M4x0.7 grounding screw.
B. Tighten the grounding wire to the DWP-902
until it is securely attached.
Pole Mount
C. Attach the other end of the grounding wire to
the pole mount. Ensure that the pole mount is
connected to an electrical ground.
STEP 7: Connect the DWP-902 to
Your Network
PoE Injector 30W
PoE OUT
54V IN
LAN IN
PoE Out
LAN IN
54V IN
Router or Switch
Computer
DWP-902
DPE-301G1
LAN1 (PoE)
A. Connect the Ethernet cable (connected to
the DWP-902 in STEP 1) from the DWP-902 to
the “PoE OUT” port on the PoE Injector.
B. Connect an Ethernet cable from a router/
switch or PC to the “DATA IN” port on the PoE
Injector.
C. Attach the power adapter to the connector
labeled “POWER IN” on the PoE Injector, and
plug it into an electrical outlet.
