4
D-Link DWP-902 Quick Install Guide
EN
G
LI
SH
STEP 4: Mount the DWP-902 to a
Pole
4A: Attach the T-form Bracket to a
1.5" to 3" (35mm to 80mm) Pole
Position the T-form bracket on the pole, then
align the W-Bar with the threaded holes in the
T-form bracket and secure using the included
M6 bolts, M6 washers, and M6 spring washers.
4B: Attach the T-form Bracket to a
>3" (>80mm) Pole
Loop two hose clamps (not included) through
the loops in the T-form bracket, position the
bracket on the pole, and then tighten firmly. To
adjust the bracket, loosen slightly and slide.
STEP 5: Attach DWP-902 to the T-
form Bracket
Use the included M8x40 Screw Bolt to attach
the DWP-902-mounted articulation pole to
the T-form bracket. The screw bolt should
be aligned with the hexagonal hole. Secure
them with the included M8 washer, M8 spring
washer, and M8 nut.
STEP 6: Connect Grounding Wire
A grounding wire is recommended to help
protect your device from lightning strikes and
the buildup of static electricity.
