27
2. The wireless client cannot access the Internet in the Infrastructure
mode.
Make sure the wireless client is associated and joined with the
correct Access Point. To check this connection:
Right-click
on the
Local Area Connection icon
in the taskbar> select
View Available
Wireless Networks
. The
Connect to Wireless Network
screen
will appear. Please make sure you have selected the correct
available network, as shown in the illustrations below.
Troubleshooting
(continued)
If it is necessary to assign a
Static IP Address
to the wireless
adapter, please refer to the instructions on the following page.
Check that the
IP Address
assigned to the wireless adapter is within
the same
IP Address range
as the access point and gateway.
Since the DWL- has an IP Address of 192.168.0.50,
wireless adapters must have an IP Address in the same range,
e.g., 192.168.0.x. Each device must have a unique IP Address;
no two devices may have the same IP Address. The subnet mask
must be the same for all the computers on the network.)
To check
the
IP Address
assigned to the wireless adapter,
double-click
on the
Local Area Connection icon
in the taskbar > select the
Support tab
and the
IP Address
will be displayed. (Please refer
to
Checking the IP Address
in the
Networking Basics
section of
this manual.)
