DVG-N5402FF User’s Manual
ADVANCED
D-Link Systems, Inc.
61
ADVANCED
→
VoIP
→
FAX
Switch FAX On CED Detection:
DVG will send FAX Re-Invite immediately as it detect FAX CED tone, that
will save handshaking time between FAX machines.
Restrict T.38:
DVG will reject T.38 Re-invite in case the FAX type contains without T.38.
FAX Detection Sensitivity:
To set higher value to make DVG to be more sensitive.
High Speed Redundancy:
Set redundancy packets for FAX image. It could repair FAX image for
non-continuous packets lost. The higher redundancy the higher bandwidth required.
Low Speed Redundancy:
Set redundancy packets for FAX handshaking signaling.
FAX Codec:
Select
G.711 a-law
or
G.711 u-law
for T.30 from the drop-down menu.
T.30 Bypass Payload Type:
Fill correct payload type of T.30 bypass method.
FAX Jitter Buffer:
Enter the buffer or jitter when receiving packets.
Note:
When you send a fax over an IP network, the IP network needs to support fax over IP
functionality (either T.38 or T.30). Please consult your VoIP Service Provider for this setting.
