DVG-N5402FF User’s Manual
SETUP
D-Link Systems, Inc.
31
WEP Authentication Mode
SETUP -> Wireless Setup -> Wireless Security (WEP)
WEP Key Length:
Select 64-bit or 128-bit data encryption.
Default Tx Key:
You can select one of the keys as active key at a time.
WEP Key Format:
Select the preferred WEP Key Format according to which WEP encryption you choose.
When WEP 64bits is enabled, you can select ASCII (5 characters) and Hex (10 characters). When WEP
128bits is enabled, you can select ASCII (13 characters) and Hex (26 characters).
WEP Key 1 – 4:
You can manually input key value from Key1 to Key4. Type a character sting and apply
changes.
For a 64-bit WEP key - Enter 5 characters (ASCII sting) or 10 hexadecimal characters (“0-9”, “A-F”).
For a 128-bit WEP key - Enter 13 characters (ASCII sting) or 26 hexadecimal characters (“0-9”, “A-F”).
Note: WEP authentication is not supported at 802.11n mode. It recommends select WPA or WPA2
for higher secure.
