D-Link DVG-5121SP User Manual Download Page 35

Page: 35 / 81

DVG-5121SP User’s Manual

D-Link Corporation

Public Port:

This is the port number on the WAN side that will be used to access the application. You may define a

single port or a range of ports. You can use a comma to add multiple ports or port ranges.

Public Type:

This is the protocol used for the special application.

Schedule:

The schedule of time when the special application will be enabled. The schedule may be set to

Always

which allows the particular application to always be enabled. If it is set to

By Schedule

, select the time

frame for the application to be enabled.

Note!

These settings are for advanced users only. Incorrect settings will cause the phone to work improperly.

Contact your ITSP for more information or assistance. The DVG-5121SP does not support the feature

for making a call without registering to a Proxy.

Summary of Contents for DVG-5121SP


















































































Search results

Summary of Contents for DVG-5121SP

Reviews:

Related manuals for DVG-5121SP

Brands by name

Popular brands

D-Link DVG-5121SP, User Manual

Search results

Summary of Contents for DVG-5121SP

Reviews:

Related manuals for DVG-5121SP

Brands by name

Popular brands