DVG-5121SP User’s Manual
D-Link Corporation
9
Rear Panel Side Panel
RJ11 PSTN
Life Line
Phone Port
This port connects to the wall phone line using an
RJ-11 phone cable.
Phone Ports
x2
Each of these ports connects to an analog phone
using an RJ-11 phone cable.
Reset Button
Use a paper clip or the tip of a pen to hold this
button down for 10 seconds to reset the unit to its
factory default settings. (power must be on)
Power Socket
This socket connects to the external power
adapter.
WAN Port
This port connects to your broadband modem or
router through an Ethernet cable.
LAN Port
This port connects to an Ethernet enabled
computer or IP sharing device using an Ethernet
cable.
WARNING: To avoid any possible damage to your DVG-5121SP device, do not connect the Phone 2
port to a wall phone line. If this is done, your DVG-5121SP may be damaged.