D-Link DVG-5121SP User Manual Download Page 73

Page: 73 / 81

DVG-5121SP User’s Manual

D-Link Corporation

8-6. Firmware

Tools > Firmware

You can upgrade the firmware of the VoIP telephone adapter here. Make sure the firmware you want to use is on the

local hard drive of the computer. Please check the D-Link Support site for firmware updates at

http://support.dlink.com. You can download firmware upgrades to your hard drive from the D-Link support site.

Firmware File:

Check the D-Link support web site to find out if there is updated firmware; if so, download the new

firmware to your hard drive, then click the UPLOAD button.

Server Type:

Select FTP or TFTP from the drop-down menu.

Provision Type:

Select the provision type from the drop-down menu.

Interval:

Select the interval from the drop-down menu.

Server Address:

Enter the IP address of your FTP, TFTP or HTTPS server then click UPLOAD.

Summary of Contents for DVG-5121SP


















































































Search results

Summary of Contents for DVG-5121SP

Reviews:

Brands by name

Popular brands

D-Link DVG-5121SP, User Manual

Search results

Summary of Contents for DVG-5121SP

Reviews:

Brands by name

Popular brands