D-Link DVG-4032S User Manual Download | Manualshive

Page: 21 / 50

background image

18

Clone MAC

Some Internet Service Providers (ISP) assigns the bandwidth via the MAC (Media Access
Control) Address. You can click the " Clone" button to copy the MAC address of the Ethernet
Card installed in the computer used to configure the device. It is only necessary to fill in the field
if required by your ISP.

The “Your MAC Address” will be blank as you log in through WAN port.

Using Phone Books Manager

Enable Phone Books Manager Server: It allows other Gateway users to register the IP
address and telephone number in this Phone books manager. It is recommended that
the unit appointed as the Phone Book Manager use static IP.

Share Local Phone Book: While this option is enabled and the gateway is performing as
a Phone Books Manager, this gateway will append its local Phone Book entries to the
Manager for other clients to lookup.

TTL (Time to Live): If a Gateway system that is controlled by the Phone Books Manager
does not report back within the deadline set by TTL, the system will be excluded from
the user’s list. Each Gateway should report to the Phone Books Manager once every 30
seconds.

Register to Phone Books Manager: To register to the Phone Books Manager.

Gateway Name for Phone Book Manager: The alias registered with the Phone Books
Manager.

Phone Books Manager Login Password: Enter the registered password. If this system is
serving as the Phone Books Manager, the set password is also the password used for
registering other Gateway systems.

Phone Books Manager IP/Domain: Enter the IP address for the Phone Books Manager.
It supports URL (Uniform Resource Locator).

Phone Books Manager Port: The protocol communication port for transmitting signals
between the Phone Books Manager and other Gateway systems. Please confirm
whether the setting is the same as that of the

Phone Books Manager.

«
...
19
20
21
22
23
...
»

Summary of Contents for DVG-4032S



















































Reviews:

No comments

Related manuals for DVG-4032S

Brand: Banner Pages: 96

Brand: Yeastar Technology Pages: 11

Brand: Yeastar Technology Pages: 66

Brand: Foxconn Pages: 14

Brand: B meters Pages: 29

IGW1111-3IN1-DB

Brand: 3onedata Pages: 3

Brand: Ubee Pages: 7

Brand: Dinstar Pages: 92

Brand: Cisco Pages: 276

Brand: SSS Siedle Pages: 28

Brand: Innoband Pages: 87

Envoy Communications Gateway

Brand: enphase Pages: 100

Brand: R9 Technology Pages: 5

Brand: ICPDAS Pages: 52

Brand: PiiGAB Pages: 68

Brand: THOMSON Pages: 88

Brand: THOMSON Pages: 946

Brand: purexx Pages: 50

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands