manualshive.com logo in svg

D-Link DVG-4032S, User Manual

The D-Link DVG-4032S is a high-performance device designed for seamless integration of voice and data communication. Featuring advanced technology and a user-friendly interface, this powerful device empowers users to maximize productivity. Enhance your experience with the DVG-4032S by downloading the free User Manual from manualshive.com to unlock its full potential.

Share
Download
background image

                                                                                                                                                                                          14 

 

4. Setting a Gateway with WEB Browser 

The gateway allows users to make settings using a web browser. After opening a browser, enter 
Gateway’s IP address as the website address in order to enter the Web configuration screen as 
shown in the following diagram.   
The factory default WAN IP address for Gateway is 

192. 168. 1. 2

.You can also enter ”101” from the 

handset to inquire about the current WAN Port IP address.    The factory default LAN Port IP address is 
192.168.8.254. 
 

Instructions 

 

Open an Internet browser.

 

 

Enter gateway’s WAN Port IP address in the website address area (If the PC is 
connected to the LAN Port, enter the LAN Port IP address. The default is 192.168.8.254)

 

 

The following registration screen will appear (The factory default settings for

 Login ID 

and Password are set to blank

).

 

 

After completing and confirming the settings, some of the settings will take effect 
immediately. But network related settings would take effect after the gateway is 
restarted. Please go to

 System Operation

 to

 

save the settings before restarting the 

system.

 

 

 

 
To avoid several people simultaneously configuring the web and causing problems to users, 
please enter the correct Login ID and password. If a user logs into the system, other users from 
different IP addresses cannot login at the same time. Please remember to logout or restart the 
system if not using the web configuration function. 

Network Settings 

The network settings are used to set the gateway’s communication ports, IP configurations, and 
Phone Books Manager IP etc.   

 

Summary of Contents for DVG-4032S



















































Reviews:

No comments

Related manuals for DVG-4032S

Luminext RF4 Wirepas Installation Instruction preview
RF4 Wirepas
Brand: Luminext Pages: 8
NetLink 700-883-PRO42 User Manual preview
700-883-PRO42
Brand: NetLink Pages: 68
Hirschmann OpEdge-8D User Manual preview
OpEdge-8D
Brand: Hirschmann Pages: 44
NXP Semiconductors JN5168-RD6040 Getting Started preview
JN5168-RD6040
Brand: NXP Semiconductors Pages: 2
Asus Aaeon AIOT-QM User Manual preview
Aaeon AIOT-QM
Brand: Asus Pages: 39
Honeywell GW-1000-NWE Installation Instructions Manual preview
GW-1000-NWE
Brand: Honeywell Pages: 24
Honeywell Notifier NFN-GW-EM-3 Installation And Operation Manual preview
Notifier NFN-GW-EM-3
Brand: Honeywell Pages: 34
Honeywell NOTIFIER ONYXWorks NFN Gateway Installation & Operation Manual preview
NOTIFIER ONYXWorks NFN Gateway
Brand: Honeywell Pages: 48
Honeywell Notifier MODBUS-GW Installation And Operation Manual preview
Notifier MODBUS-GW
Brand: Honeywell Pages: 61
Honeywell GENT VIG-BNG Installation And Configuration preview
GENT VIG-BNG
Brand: Honeywell Pages: 4
Honeywell Notifier 002-467 Manual preview
Notifier 002-467
Brand: Honeywell Pages: 9
Honeywell CIU 888 Installation Manual preview
CIU 888
Brand: Honeywell Pages: 37
Honeywell NOTIFIER BACNET-GW-3 Installation And Operation Manual preview
NOTIFIER BACNET-GW-3
Brand: Honeywell Pages: 42
Honeywell HON-CGW-MBB Installation And User Manual preview
HON-CGW-MBB
Brand: Honeywell Pages: 154
Honeywell ESSER IQ8Wireless Gateway Installation Instruction preview
ESSER IQ8Wireless Gateway
Brand: Honeywell Pages: 2
ATX Ucrypt IP2IP Quick Start Manual preview
Ucrypt IP2IP
Brand: ATX Pages: 30
ATX UCrypt IP2Q Quick Start Manual preview
UCrypt IP2Q
Brand: ATX Pages: 32
RTA 460BCSC-NNA4 Product User Manual preview
460BCSC-NNA4
Brand: RTA Pages: 66

Brands by name

Popular brands

Load more brands