D-Link DVG-2016S User Manual Download Page 36

Page: 36 / 75

DVG-2032S/2016S User’s Manual

VoIP Gateway Configuration

D-Link Systems, Inc.

General Settings

→

Line settings

FXS Impedance:

Select different impedance from the drop-down menu.

General Settings

→

Line settings

This feature is a call drop standard for a VoIP Gateway to determine whether or not to hang up the phone.
The VoIP Gateway will disconnect the call automatically to avoid keeping the line engaged if the detected
volume is below the

Silence Detection Threshold

or the time exceeds the

Drop Silent Call Timeout

Silence Detection Threshold:

Enter the threshold (dB) to detect if there is voice coming from RJ-11

interface.

Drop Silent Call Timeout:

Enter the duration (second) for detecting if there are RTP packets receiving

from IP network.

Note:

Improper values for above settings might cause unexpected automatic disconnection of a call.

Default values are recommended.

General Settings

→

Line settings

Enable IVR Option:

Check the box to enable IVR function.

Summary of Contents for DVG-2016S












































































Search results

Summary of Contents for DVG-2016S

Reviews:

Related manuals for DVG-2016S

Brands by name

Popular brands

D-Link DVG-2016S, User Manual

Search results

Summary of Contents for DVG-2016S

Reviews:

Related manuals for DVG-2016S

Brands by name

Popular brands