27
the port belonging to this group is not used with FXO and FXS,
either).
Dial-In Direct Digits
DID set as PBX is set up by 0-4. If 0 is chosen, it will be set as
4. Usually, a setup of PBX is followed
FXS Reverse
A specific signal indicating the status of the
conversation.
Tone Setting
Adjust the tone frequency according to each
country.
Line Detect
On Hook Detect, Off Hook Detect, Hook Flash
Detect: On Hook, Off Hook, and Hook timing
setting. Line detect basically detects the current
phone status.
Caller ID
Setup by area code.
Voice TX Gain
(-48db ~
24db)
Sets a specific sound intensity for transmitting
sound.
Voice RX Gain
(-48db ~
24db)
Sets a specific sound intensity for receiving
sound.
Click
[Submit]
to confirm the change. Click
[Cancel]
to restore the previous value.
4.5.4 Restore Setting
Select
Restore Setting
from the
Administrator Setting
menu.
When you select “
Restore
” you will see the following display:
To restore all the parameters back to factory default setting, click “
Default Setting?”
. However dialing
plan and IP address will remain the same.
