5
RESET
CONSOLE
ET HERN ET
VoI P
WA N
L IN E
1
PSTN
12V 1A
2
Connections
- Back Panel of Unit
AC Power Connector
Use the
included power adapter. If you use
a power adapter other than the
one included with the product you
will damage the device and void
the warranty on this product.
PSTN/VoIP
Switch
to
select PSTN
or VoIP mode
When the
switch is in
the down
position,
Phone1/2 will
be in VoIP
Mode.
When the
switch is in
the up
position,
Phone1/2 will
be configured
to PSTN
Mode.
Reset Switch
Used to return the device
to its original configuration. This is the
same as performing a factory reset.
Diagnostic Port
An RJ-14
port used to configure the
device. (User needs a RJ-
14 to RS-232 converter).
Plug one end of a straight-
through wired RJ-14 cable
to the device and the other
end to a serial port of a PC
running a terminal
emulation program (such
as Microsoft HyperTerminal)
or a VT-100 terminal.
Phone 1 to 2
Normal RJ-11 phone
jacks used to
connect telephones
and fax machines.
Plug your normal
telephone(s) and/or
fax machine directly
into any of these
jacks.
Line
RJ 11 phone
jack for connecting
to a standard
telephone wall outlet
through an
approved (No. 26
AWG or larger)
telecommunications
line cord.
Ethernet
WAN
A
10Mbps
Ethernet port
fitted with an
RJ-45
connector
used to
connect the
VoIP gateway
to a WAN
device (e.g.
Cable/ADSL
Modem). This
port accepts
Category 3, 4
or 5 UTP
cabling with
an RJ-45
connector.
Ethernet LAN
A 10/100Mbps
dual-speed
Fast Ethernet
port fitted with
an RJ-45
connector
used to
connect the
VoIP gateway
to a LAN
device (hub,
switch, PC,
etc.). This port
accepts
Category 5 or
better UTP
cabling with
an RJ-45
connector.
Warning!
Using a different power adapter than the
one included with your purchase will damage the
DVG-1120S and void the warranty.