13
Disabled
: No WEP encryption (Default)
64-bit
128-bit
256-bit
Key ID
Press the down arrow on the remote to select the
Key ID
.
You can enter up to four encryption keys that is used to encrypt data passed
wirelessly over the network. Only one of the keys are used for encryption.
You can enter a key for use, enter up to three other keys for later use and
easily change from one key to another by changing the
Key ID
that controls
which key is in use.
Keys
Enter encryption keys in the four boxes by using the remote control number pad
or the on-screen keyboard. To connect to an encrypted wireless device, the key
you enter in the DVC-1100 must match the key of the wireless device. These
keys are entered in hexadecimal format, meaning you can use the numbers 0
through 9 and the letters A through F. The key must be entered as a specific
number of characters to be accepted as detailed below:
A 64-bit encryption key must be exactly 10 characters in length. (Example:
12345678FA
is a valid string of 10 characters for 64-bit encryption.)
A 128-bit encryption key must be exactly 16 characters in length. (Example:
456FBCDF12340012
is a valid string of 16 characters for 128-bit encryption.)
WEP Type
Press the down arrow on the remote to select the
WEP
Type
. Select one of the
WEP Types by pressing
Enter
. The
WEP Type
must match the type used by
the wireless network if encryption is enabled.
Wireless Settings Screen (continued)
Using the Setup Wizard (continued)
