manualshive.com logo in svg

D-Link DVC-1100, Manual, Page: 43 / 79

Share
Download
D-Link DVC-1100 Manual Download Page 43

43

Main Screen > Settings > Network > Wireless Site Survey > Wireless
Settings

Using the Configuration Menu (continued)

The Wireless Settings screen controls the following wireless connection and
encryption settings on the DVC-1100:

SSID

The name of the selected wireless device from the

Wireless Site Survey

 screen.  This name can be

entered or edited using the on-screen keyboard (e.g., if
the SSID broadcast feature on a wireless device was
disabled and the SSID did not appear on the 

Wireless

Site Survey

 screen). The connection status for the

selected SSID device is displayed next to the SSID
(

Connection OK

 or 

Connection Failed

).

Select one of the following authentication modes:

Open Key:

 Communicates the key across the network.

Shared Key: 

Allows communication only with devices

with identical encryption settings.

The WEP Encryption key can be set to 64, 128 or 256
bit-length.  The 

WEP Type

 must match the WEP

encryption bit-length on the wireless network.

Auth Type

WEP Type

i2eye AP

Summary of Contents for DVC-1100
















































































Reviews:

No comments