D-Link DSN-3200 - xStack Storage Area Network Array Hard Drive, User Manual

Page: 82 / 168

82 Chapter 5 Configuring the xStack Storage Array
To remove a volume from the right box, click the volume in the right box
and click
Remove to return the volume to the left box.
10. Click Finish . On completion, the xStack Storage Array assigns a world-wide unique name to
the iSCSI target node. You can use the procedure in Section 6.11 to view the name and the
other target node parameters.
5.4.5.1 Changing the CHAP Secret
When you created an iSCSI target node, you could specify an optional CHAP secret. If you did not,
you can use the following procedure to specify one. You can also use this procedure to change
the CHAP secret. Record the information in Appendix B.
1. Click a network entity (prefaced by naa ) in the Logical Resources tab.
2. On the iSCSI menu, click Change CHAP Secret . The Set CHAP Secret dialog box appears (see
Figure 5-33).
Figure 5-33. Set CHAP Secret Dialog Box
3. Complete the fields in the dialog box:
–
CHAP Secret
. Enter the CHAP secret.
–
Confirm CHAP Secret
. Enter the same CHAP secret.
The CHAP secret is case sensitive. For security, each typed character in
CHAP Secret and Confirm CHAP Secret appears as an asterisk (*).
4. Click OK .