xStack Storage User’s Guide
75
5.4.4.2
Deleting Network Portals
If you no longer need a network portal, use the following procedure to delete it.
A warning message does not appear before you delete a network portal.
Therefore, be sure you do not need the network portal before you delete it.
1.
In the
Logical Resources
tab, click the network portal you want to delete.
2.
Perform one of the following steps to delete the network portal:
–
On the
Network
menu, click
Delete Network Portal
.
–
Right-click and click
Delete Network Portal
.
5.4.5
Creating iSCSI Target Nodes
The iSCSI target node is the abstract entity used to permit access to the volumes on an xStack
Storage Array by an initiator. The xStack Storage Array supports up to 1024 iSCSI target nodes.
After you create one or more volumes, iSCSI initiators, and LAGs, you have all the prerequisites
to create an iSCSI target node. As you create iSCSI target nodes, record the information in
Appendix B.
To create an iSCSI target node, use the following procedure.
1.
In the
Logical Resources
tab, click
Target Resources
or
Network Entities
.
2.
Perform one of the following steps:
–
On the
iSCSI
menu, click
Create iSCSI Target Node
.
–
Right-click and click
Create iSCSI Target Node
.
Either step starts the Create iSCSI Node Wizard and displays the Enter iSCSI Node Information
screen, which initially appears as in Figure 5-26.
Figure 5-26. Create iSCSI Node Wizard - Enter iSCSI Node Information Screen
Summary of Contents for DSN-2100 xStack Storage
