D-Link DSL-G256DG User Manual Download Page 6

Page: 6 / 191

D-Link DSL-G256DG VDSL Router User Manual

Product Overview

Page 6

Rear Panel

Number

Description

VDSL Port

- Use the DSL cable to connect to your telephone line

(RJ-11 port).

USB Port

- Use the USB port to connect your USB device.

Ethernet Ports

- Use the Ethernet ports to connect the router to your

Ethernet LAN or Ethernet devices.

WAN Ports

- Use the WAN ports to connect the router to your

Ethernet LAN or Ethernet devices.

5GHz Wireless On/Off Switch Button

- Please press and hold on

for 3 seconds to turn on/turn off.

2.4GHz Wireless On/Off Switch Button

- Please press and hold on

for 3 seconds to turn on/turn off.

Reset Button

- Press and hold the button for 10-15 seconds to

restore the device to its original factory default settings.

Power Button

- Push in to power-on the router. Push again to

power-off the router.

Power Receptor

- Receptor for the supplied power adapter.

Summary of Contents for DSL-G256DG
































































































































































































Search results

Summary of Contents for DSL-G256DG

Reviews:

D-Link DSL-G256DG, User Manual, Page: 6 / 191

Search results

Summary of Contents for DSL-G256DG

Reviews: