D-Link DSL-G256DG User Manual Download Page 148

Page: 148 / 191

D-Link DSL-G256DG VDSL Router User Manual

Web User Interface Configuration

Page 148

Samba

To access the

Samba

page, click the

Advanced

menu link, at the top, and then click the

Samba

menu link, on the left.

On this page the user can configure services related to the Samba connectivity of this
product.

In this section, the following parameters can be configured:

USB Storage:

This parameter will display the USB storage device’s status.

Enable Samba:

Tick this option to enable the Samba feature.

NetBios Name:

Enter the NetBIOS name here.

Directory Name:

Enter the directory name here.

Charset:

Select the character set option here. The only option available for

selection is

UTF8

Click the

Apply/Save

button to accept the changes made.

Summary of Contents for DSL-G256DG
































































































































































































Search results

Summary of Contents for DSL-G256DG

Reviews:

D-Link DSL-G256DG, User Manual, Page: 148 / 191

Search results

Summary of Contents for DSL-G256DG

Reviews: