D-Link DSL-G256DG VDSL Router User Manual
Web User Interface Configuration
Page 47
In this section we can configure the advanced wireless settings.
Band:
This parameter will display the current wireless band being configured.
Channel:
Automatically select a channel or manually select the channel.
Auto Channel Timer:
Enter the auto channel timer value used here.
802.11n/EWC:
Select this 802.11n/EWC option used here. Options to choose from
are
Auto
and
Disabled
.
Bandwidth:
Select between 20MHz or Auto 20/40MHz
802.11n Rate:
Select the 802.11n rate used here.
802.11n Protection:
Select this 802.11n protection option used here. Options to
choose from are
Auto
and
Off
.
Support 802.11n Client Only:
Select the support for 802.11n clients only option
used here. Options to choose from are
On
and
Off
.
RIFS Advertisement:
Select the RIFS advertisement option used here. Options to
choose from are
Auto
and
Off
.
OBSS Coexistence:
Select the OBSS co-existence state here. Options to choose
from are
Enable
and
Disable
.
RX Chain Power Save:
Select the RX chain power save state here. Options to choose from are
Enable
or
Disable
.
Power Save status:
This parameter will display the power save status.
RX Chain Power Save Quiet Time:
Enter the RX chain power save quiet time value used here. This option becomes available after the
RX Chain Power Save
was
enabled.
RX Chain Power Save PPS:
Enter the RX chain power save PPS value used here. This option becomes available after the
RX Chain Power Save
was enabled.