30
D-Link DSL-520B ADSL2+ Modem User Manual
Section 9 - Advanced Setup
PPP over Ethernet (PPPoE)
This page allows you to configure your PPPoE connection.
PPP Username:
Enter your username as provided by
your ISP.
PPP Password:
Enter your password as provided by
your ISP.
PPP Service Name:
Enter any name that will help you
identify your connection. This field will not affect your
connection.
Dial on demand (with idle timeout timer):
Allows
you to manually connect to the Internet so you are not
permanently connected. Idle timeout timer is included.
PPP IP extension:
Used by some ISPs. Check with your
ISP to see if it is required.
Use Static IP Address:
Select if your ISP has provided
you with a static IP address. If selected, you will be asked
to enter the static IP address.
Retry PPP password on authentication error:
Select if you want the router to automatically retry your PPP username and password when there
is an authentication error on your DSL line.
Enable PPP Debug Mode:
Select if you want to keep a log of connection negotiation transactions. This option is used for troubleshooting connection
issues.
Bridge PPPoE Frames Between WAN and Local Ports (Default Enabled):
Use the default setting unless otherwise instructed by your ISP.
MTU:
Use the default setting of 1492 unless otherwise instructed by your ISP.
Click
Next
.
Summary of Contents for DSL-520B
Page 1: ......
