52
D-Link DSL-500B User Manual
Web Configuration
Adding Port Triggering
Step 1
To set up port triggering for a service, select
Advanced Settings
>
NAT
>
Port Triggering
, and click
Add
.
Step 2
Select the required application from the
Select an application
drop-down list, or manually enter the information in the
Custom
application
field.
Step 3
Trigger Port Start and Trigger Port End:
Enter the port that is to
be monitored for outgoing data traffic.
Trigger Protocol:
Select the protocol that is to be monitored for
outgoing data traffic.
Open Protocol:
Select the protocol that is to be allowed for
incoming data traffic.
Open Port Start and Open Port End:
Enter the port that is to be
opened for incoming traffic.
Step 4
Click
Save/Apply
to apply the settings.
Removing Port Triggering
Step 1
Select the
Remove
check box.
Step 2
Click
Save/Apply
to apply the settings.
Summary of Contents for DSL-500B
Page 1: ......
