D-Link DSL-500B User Manual Download Page 43

Page: 43 / 84

D-Link DSL-500B User Manual

Web Configuration

WAN Configuration

Select

Advanced Setup > WAN.

This page allows you to modify

and configure the WAN interface.

Note:

After a PVC is deleted or modified, the system must be

rebooted. Otherwise, the modification does not take effect.

Click

Add

Edit

, or

Remove

to configure your WAN interface.

Click

Save/Reboot

to save the modification, and reboot the

modem to make the modification effective.

If you are setting up the WAN interface for the first time, click

Add

and the

ATM PVC Configuration

page will appear.

Advanced Setup

This chapter includes advanced features used for network management and security as well as administrative tools

to manage the Router, view status and other information which is used to examine the performance and for

troubleshooting.

Summary of Contents for DSL-500B





















































































Search results

Summary of Contents for DSL-500B

Reviews:

Related manuals for DSL-500B

Brands by name

Popular brands

D-Link DSL-500B, User Manual

Search results

Summary of Contents for DSL-500B

Reviews:

Related manuals for DSL-500B

Brands by name

Popular brands