DSL-2730E User Manual
48
3.3.4 Port Forwarding
This function is used to open ports in your device and redirect data through those
ports to a single PC on your network (WAN-to-LAN traffic). It allows remote users to
access services on your LAN, such as FTP for file transfers or SMTP and POP3 for
e-mail. The device accepts remote requests for these services at your global IP
address. It uses the specified TCP or UDP protocol and port number, and redirects
these requests to the server on your LAN with the LAN IP address you specify.
Note that the specified private IP address must be within the available range of the
subnet where the device is in.
Choose
Advanced
>
Port Forwarding
. The page shown in the following figure
appears.
Click the
Usual Service Name
drop-down menu to choose the service you want to
set up for port forwarding. When you have chosen a service, the default settings
will populate the table below.
If the service you want to set up isn’t listed, select the
User-defined Service Name
radio button and type in a service name. Configure the
Protocol
,
WAN Setting
,
WAN Interface
,
WAN Port
,
LAN Open Port
and
LAN IP Address
.
Click the
Apply changes
button to finish.
Summary of Contents for DSL-2730E
Page 1: ...DSL 2730E User Manual ...
Page 14: ...DSL 2730E User Manual 8 ...
Page 95: ...DSL 2730E User Manual 89 ...
