DSL-2730E User Manual
6
2 Hardware Installation
Step 1
Connect the
DSL
port of the device and the
Modem
port of the splitter
with a telephone cable. Connect the phone to the
Phone
port of the
splitter through a telephone cable. Connect the incoming line to the
Line
port of the splitter.
The splitter has three ports:
Line: Connect to a wall phone port (RJ-11 jack).
Modem: Connect to the DSL port of the device.
Phone: Connect to a telephone set.
Step 2
Connect a
LAN
port of the device to the network card of the PC through
an Ethernet cable (MDI/MDIX).
Note:
Use twisted-pair cables to connect the device to a Hub or switch.
Step 3
Plug one end of the power adapter to the wall outlet and the other end to
the
Power
port of the device.
Figure 3 displays the application diagram for the connection of the device, PC,
splitter and telephone sets, when no telephone set is placed before the splitter.
Figure 3 Connection diagram
Summary of Contents for DSL-2730E
Page 1: ...DSL 2730E User Manual ...
Page 14: ...DSL 2730E User Manual 8 ...
Page 95: ...DSL 2730E User Manual 89 ...
