D-Link DSL-2730E, User Manual

Page: 38 / 99

DSL-2730E User Manual
32
The following table describes the parameters in this page.
Field
Description
Band
Choose the working mode of the modem. You can
choose from the drop-down list.
Mode
Choose the network model of the modem, which is
varied according to the software. By default, the
network model of the modem is AP .
SSID
The service set identification (SSID) is a unique name
to identify the modem in the wireless LAN. Wireless
stations associating to the modem must have the same
SSID. Enter a descriptive name that is used when the
wireless client connecting to the modem.
Channel
Number
Choose a channel from the drop-down list box.
A channel is the radio frequency used by 802.11b/g
wireless devices. There are 13 channels (from 1 to 13)
available depending on the geographical area. You
may have a choice of channels (for your region) and
you should use a different channel from an adjacent AP
to reduce the interference. Interference and degrading
performance occurs when radio signal from different
APs overlap.
Radio Power
(Percent)
You can choose the transmission power of the radio
signal. The default one is 100% . It is recommended to
choose the default value 100% .
Show Active
Clients
Click it to view the information of the wireless clients
connected to the modem.
Channel Width
Select the appropriate band of 20MHZ or 40MHZ
according to your subscribed broadband service.
Control
Sideband
Choose the channel selection mode as Upper or
Lower .