DSL-2650U/NRU
3G/ADSL/Ethernet Router
with Wi-Fi and Built-in Switch
User Manual
Configuring via Web-based Interface
Parameter
Description
Hide Access Point
If the checkbox is selected, other users cannot see your Wi-Fi
network. (It is recommended not to select this checkbox in order to
simplify initial configuration of your WLAN.)
SSID
A name for the WLAN. By default, the value
DSL_2650NRU
is
specified. It is recommended to specify another name for the
network upon initial configuration (use digits and Latin characters).
BSSID
The parameter that uniquely identifies your wireless network. You
cannot change the value of this parameter.
Country
The country you are in. Select a value from the drop-down list.
Channel
The wireless channel number. By default, channel 6 is specified. If
you want to use another channel, select a value from the drop-down
list. When the
auto
value is selected, the router itself chooses the
channel with the least interference.
Clients Isolation
Select the checkbox to isolate the users of your WLAN (to forbid
wireless clients to communicate to each other).
Enable Wireless Guest
Network
Select the checkbox to create a separate part of your WLAN with
open authentication type and with no password.
Guest SSID
A name for the guest part of your WLAN.
Block multicast
Select the checkbox to disable multicasting for the router's WLAN.
Deselect the checkbox to enable multicasting from WAN
connections for which the
Enable IGMP Multicast
checkbox is
selected.
When you have configured the parameters, click the
Change
button.
Page
48
of 107
