Section 3 – Configuration
D-Link DSL-2642B User Manual
63
Inbound Filtering
To access Inbound Filtering, point to the
Filtering Options
on the left window and click
Inbound IP Filtering
submenu, or click the
Inbound IP
Filtering
button in the Filtering Options window.
The Inbound Filter allows you to create a filter rule to allow incoming IP
traffic by specifying a filter name and at least one condition on this
window. All of the specified conditions in this filter rule must be satisfied
for the rule to take effect. By default, all incoming IP traffic from the
Internet is blocked when the firewall is enabled.
Click the
Add
button to see the Add Inbound IP Filtering section, enter
the information in the section. Explanations of parameters are described
below. Click the
Apply
button to add the entry in the Active Inbound IP
Filtering table. To remove an entry in the table, click the corresponding
button. To modify a table entry, click the corresponding
button,
make the desired changes, and then click the
Apply
button.
Summary of Contents for DSL-2642B
Page 1: ...4fu06 ...
