D-Link DSL-1500G User Manual Download Page 58

Page: 58 / 73

DSL-1500G++ User Manual

displayed:

Specify the start and end of the port range for the TCP/UDP protocol that you want to

filter. Then select TCP or UDP protocol from the Protocol drop-down list. After that,

use the Direction drop-down lists to specify whether you want to allow/block inbound

traffic, and allow/block outbound traffic. Click on

. The Firewall Port Filters page

is displayed, containing details of the TCP portfilter that you have just added.

• For a non-TCP/UDP portfilter click on Add Raw IP Filter. The following page is

displayed:

Specify the protocol number in the Transport Type text box, for example, for IGMP,

enter protocol number 2. Then use the Direction drop-down lists to specify whether you

want to allow/block inbound traffic, and allow/block outbound traffic. Click on

The Firewall Port Filters page is displayed, containing details of the IP portfilter that

you have just added.

Each portfilter displayed in the Firewall Port Filters page has a

Delete

hyperlink

assigned to it. To delete a portfilter, click on this link, then at the confirmation page, click

. The port filter is removed from the Firewall configuration.

Configuring validators

A validator allows/blocks traffic based on the source/destination IP address and netmask.

Summary of Contents for DSL-1500G










































































Search results

Summary of Contents for DSL-1500G

Reviews:

Related manuals for DSL-1500G

Brands by name

Popular brands

D-Link DSL-1500G, User Manual

Search results

Summary of Contents for DSL-1500G

Reviews:

Related manuals for DSL-1500G

Brands by name

Popular brands