D-Link DSL-1500G User Manual Download Page 26

Page: 26 / 73

DSL-1500G++ User Manual

• Up-Time; the length of time (in hours: minutes: seconds) that your current session has

been connected for

• Version: The released firmware version of DSL-1500G++.

•

Defined Interfaces:

This section lists LAN interfaces that have been defined. For more information on defining

LAN interfaces, each interface listed has a Show Statistics hyperlink associated with it.

Click on this for detailed information about some/all of the following (depending on the

interface type and configuration):

• the interface

• connection details

• port configuration

• service parameters

DSL-1500G++ has default interfaces defined. These defaults depend on the type of image

that you are building.

3.2.3 About the Quick Start page

This page allows you to configure your WAN login connection. From the left-hand menu,

click on

Quick Start

. The Quick Start page is displayed.

There are two types of login that you can configure:

Summary of Contents for DSL-1500G










































































Search results

Summary of Contents for DSL-1500G

Reviews:

Related manuals for DSL-1500G

Brands by name

Popular brands

D-Link DSL-1500G, User Manual

Search results

Summary of Contents for DSL-1500G

Reviews:

Related manuals for DSL-1500G

Brands by name

Popular brands