D-Link DSC-6620, Manual

Page: 13 / 143

13
DCS-6620 User’s Manual
D-Link Systems, Inc.
Installation Wizard
Installation is now complete.
IMPORTANT:
A hardware reset of the PTZ Internet Camera may be required if the
Installation Wizard
cannot
find the camera. To accomplish this reset, lightly insert a paper clip (or a similar sized tool)
into the reset hole on the side of the camera (see page 130 for the location of the reset hole).
The LED on the front of the camera will begin blinking alternately. When it stops the blinking
cycle continue to hold in the reset button for about 10 seconds.
The opening Installation Wizard screen
will appear and
show a MAC address of
the
DCS-6620
and an IP Address (which
may or may not be correct depending on
what you have your
DCS-6620 connected
to). If you have a DHCP* server on your
network, there will be a valid IP Address
displayed here, indicated by a “Yes” under
the assigned column.
*A DHCP server is a device that supplies
IP Addresses to its clients that are on the
same network.
Click
Finish
To access the Installation Wizard screen, click on the
Installation Wizard Icon on your desktop.