manualshive.com logo in svg

D-Link DRO-220i, User Manual

Share
Download
D-Link DRO-220i User Manual Download Page 60

Frequently Asked Questions 

Dlink DRO-220i User Guide 

 

60  

ƒ

 

Go to Tools 

→

 Ping Test, and ping to the ISP Gateway IP Address. If the ping 

succeeds then the WAN link connectivity is fine, otherwise contact the ISP to fix 
this issue. 

ƒ

 

In Tools 

→

 Ping Test, ping to dlink.com or any other domain name. If the ping 

fails, then go to Misc 

→

 DNS Proxy and ensure that the DNS Server IP Addresses 

are configured properly. 

ƒ

 

Now ping to a global IP Address (eg. 4.2.2.2) from your LAN PC. If this ping 
fails, then either NAT or Route configuration is not proper.  

o

 

Check NAT Configuration:- Ensure that NAT is enabled on the router’s 
WAN interface via NAT 

→

 Interface Configuration. And either Many-To-

One or Many-To-Many NAT has been configured through NAT 

→

 NAT 

Configuration. 

o

 

Check Route Configuration:- Verify that a default static route has been 
configured via the WAN Interface with the correct Gateway IP Address 
via Routing 

→

 Static page. 

ƒ

 

Now ping to a domain name (e.g. dlink.com) from your LAN PC. If this ping 
fails, check the DNS Configuration at your PC. The DNS Server can be set to the 
router’s IP Address. If your PC has been configured with a global DNS Server, 
then ensure that the DNS Server is reachable. 

 

9.2

 

DHCP, DNS 

 

Q5.

 

What is the purpose of DHCP Server Auto Configuration? 

 

Ans: 

This field allows you to specify whether or not the Router will automatically assign 

the DNS settings to the LAN computers. If Enable Auto Configuration is chosen, the 
DNS Proxy is enabled in the Router. The router acts as DNS server. It gets the DNS IP 
manually or from ISP. If Disable Auto Configuration is chosen by the administrator, the 
Domain Name and DNS Server Settings entered by the administrator will be assigned to 
the LAN computers.  

 
 

Q6.

 

I want to use the router’s DHCP Server for the LAN Systems. But I have some 

Servers (File Server, Web Server) in the LAN for which I want to assign specific IP 
Addresses. How can I do this? 

 

Ans: 

Use 

DHCP Static Mapping

 feature to reserve specific IP Addresses to the Server 

Systems. Go to Misc 

→

 DHCP 

→

 Static Mapping, and configure the MAC address and 

IP Address mappings.

 

 

9.3

 

Routing 

 

Summary of Contents for DRO-220i

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands