manualshive.com logo in svg

D-Link DRO-220i, User Manual

Share
Download
D-Link DRO-220i User Manual Download Page 13

Product Overview 

Dlink DRO-220i User Guide 

 

13  

ƒ

 

Firmware Upgrade –

 The administrator can easily upgrade the router’s firmware 

whenever a new firmware release is made available. The firmware can be 
upgraded from a local/remote location in a secure manner. 

ƒ

 

SNMP 

– It helps to manage configurations like data networks typically include 

bridges, routers, links into WANs, and end-user equipment from multiple-
vendors. It is easy to install, easy to use, and don’t place a great burden on the 
network. It supports Message Integrity, Authentication and Encryption.  

 

Secure Web-based Management 
 

The product provides SSL-based secure, user friendly Web Pages to configure and 
manage the device and the network. The router also supports Secure, Remote 
Configuration of the device to enable easy remote monitoring and troubleshooting. In 
addition, it provides Comprehensive Logging, Secure Local/Remote firmware upgrade, 
Configuration Backup and Restoration. 
 
The supported Web Browsers for router configuration are: 

ƒ

 

Internet Explorer Ver 6.0 +  

ƒ

 

Mozilla  5.0 (Release 1.5)  

ƒ

 

Netscape 8.0 

ƒ

 

Mozilla FireFox 1.0 

 
 
 
 
 
 
 

Summary of Contents for DRO-220i

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands