DHCP, DNS and Time
Dlink DRO-220i User Guide
19
area code is 022, then user should enter 22 in the area code field
Dial Prefix
In Dial Prefix, user should enter the country code if the user is dialing to
other country, or else enter zero e.g. if user wants to dial to Singapore
then enter 0065 as dial prefix where 65 is country code of Singapore.
Phone Number
Enter the phone number of the ISP, excluding the Area Code and Dial
Prefix.
Alternate Phone
Number
Enter the alternate phone number of the ISP, excluding the Area Code
and Dial Prefix. If primary phone number is busy then alternate phone
number will be dialed automatically
Protocol
Compression
This will enable or disable Protocol Compression field. This should be
same as ISP settings. Before enabling or disabling this field, verify ISP
settings and then select accordingly
User Name
Enter the user name given by the ISP provider. It can be 20 characters
long
Password
Enter the password given by the ISP provider. It can be 20 characters
long.
Idle Timeout
If there is no activity on the line then, the connection will hang-up
automatically after the time entered in Idle Timeout field in seconds.
Enter zero in this field to disable auto hang-up
Retries
Enter the number of times user wants the system to retry the dialing to
connect to ISP if it is not connected. It is a single digit number
L
Note:
If the area code of user and the ISP is same, then enter zero in the area code
field.
2.4.2.3. Dial Up – Dial In
This is to establish Dial in connection and User can configure either channel 1 or channel
2 depending upon the connection type he/she selects from the ISDN connections page.
User can select Channel 1(B1) or Channel 2(B2) only when the connection type is 2-64K
Dial in. For all other connection types Channel 1(B1) will be selected automatically.
When the user clicks on the Channel 1 or Channel 2 he will get the information which he
configured previously for the particular channel.
Dial In
Select
Interface
→
WAN2
→
Dial up
→
Dial in
→
Dial In
to establish Dial in
connection.
Dial In Settings for WAN2 Interface
Web UI
