background image

DPH-80 Phone User Manual   

 

Configuring

 the SIP phone 

 

 

 

PPP password:

 This is the password used for PPP authentication with the PPP server 

while obtaining an IP address via PPPoE. 

Idle Timeout:

 This is the time interval in seconds of session inactivity after which the 

PPP session should be terminated. If this is set to 0, then the session will never be 
terminated. This field is grayed out at the moment so that it can’t be modified. This will 
allow the PPP session to be on permanently unless the server closes the connection. 

This field can be made active later to enable a configuration of timeout value. 

IP Address: 

This should have the IP address of the phone in dot-separated IP address 

form. An illegal IP address won't be allowed for this field. 

Net Mask: 

This will have the Net Mask of the network to which the IP phone is 

connected. It must be in dot-separated form. An illegal IP address mask won't be 
allowed for this field.  

Default Gateway: 

This is the default gateway for the IP phone. An illegal IP address 

won't be allowed for this field. 

DNS server Address: 

This is the IP address of the DNS server, which will respond to the 

DNS queries from the IP phone. It must be in dot-separated form. An illegal IP address 

won't be allowed for this field. 

TFTP Server: 

This has the IP address of the host where TFTP server is running. It must 

be in dot-separated form. An illegal IP address won't be allowed for this field. 

Firmware Filename (up to 6 characters): 

This is the filename which you want to 

download from the TFTP server. It may be 6 characters long at maximum. It should 
start with a letter and should consist of digits, letters and underscore.  

 15

Summary of Contents for DPH-80






























Reviews: