DPH-80 Phone User Manual
Configuring
the SIP phone
Configuration Main Page
Click on General Configuration. A new page containing information about your system
and the DPH-80 will appear.
General Configuration
Firmware Version
: It shows the current firmware version of the IP phone. It is updated
whenever the SIP phone software is updated. It cannot be modified.
Hardware Version:
It shows the current hardware version of the IP phone. It cannot be
modified.
MAC Address:
This shows the MAC address of the board in colon-separated hex form.
Initially it contains the default value ff:ff:ff:ff:ff:ff. It can be modified once to a non-
default value.
Once modified, it will be grayed out and cannot be changed again.
Country Code:
This is a drop-down menu. Select the appropriate country. This field
controls the type of tones played by the SIP phone.
Obtain IP address using:
If
static
option is selected, then a user-configured IP address,
Net Mask, Default gateway, and DNS server address would be used for the phone. If
DHCP
is selected, then these values will be obtained using DHCP. If the PPPoE is
selected, and using the PPP username and password for authentication, PPPoE obtains
an IP address for the phone. Default selection is Static-enabled.
PPP user name:
This is the user name used for PPP authentication with the PPP server
while obtaining an IP address via PPPoE.
14
Summary of Contents for DPH-80
Page 1: ...DPH 80 IP Phone User s Guide...
Page 12: ......
