7
Using the Web Configuration
On the following pages you will find a description of each of the screens that are available to
you for the web configuration of the DP-311P.
Re-power the DP-311P by pulling the power adapter plug out and re-inserting it.
After you have finished configuring the DP-311P, in order for the changes to
take effect, you must toggle the mode switch on the rear panel of the print
server back to “Normal” mode.
Set the switch to
Config
mode on the rear panel of the DP-311P.
Change your wireless adapter setting to
Ad-Hoc
or Peer-to-Peer mode. (Open
the Configuration utility for your network adapter and make sure that your
network adapter is set to Ad-Hoc mode in your configuration settings.)
(For D-Link network adapters, you can open the web-based configuration utility
and go to the Site Survey function and select the SSID named
WLAN-PS
. The
Channel is
1
and WEP is set to
Disable
. The network adapter will now be in Ad-
Hoc mode.)
Change the wireless adapter IP Address so that it is in the same IP Address range
as the DP-311P (192.168.0.x). For instructions on changing the IP Address,
please refer to the Networking Basics section in this manual. The subnet mask is
255.255.255.0.
Restart the computer.
Open your web browser and input the IP Address of your wireless print server.
The default IP Address is 192.168.0.10.
you begin configuring the DP-311P:
Before
you have completed the configuration:
After
