D-Link DNS-722-4 Product Manual Download

Page: 76 / 93

D-Lnk DNS-722-4/DNS-726-4 User Manual

Secton - Configuraton

Playback Manager Application

Single/Quad

Split Screen:

Full Screen:

Information

Window:

Audio Volume

Control :

Digital Zoom:

Play/Stop/

Pause:

Speed:

Users can select to view a single camera or 4
cameras at a time. Basic version only supports 1
camera playback.

Select to display the video with full screen. Press
ESC button on the keyboard to return to normal
display.

Display video date and time, cue in/out points, time and speed.

Adjust the sound level.

Click the icon to digital zoom in or digital zoom out the view. Every camera can use this function.

Select a camera/video and click this button to play/stop/pause a particular channel.

Click the + or - button to increase or decrease the playback speed.

Step 1: Please insert the product CD.
Step 2: Install the

Playback

application from CD.

Step 3: Run “

Playback

” application from the Start ->

Programs -> D-Link -> Playback Manager

The Playback System control panel is similar to the
playback panel in Internet Explorer. See page 57-58 for
more details about those buttons.

Remote Server

Summary of Contents for DNS-722-4






























































































Search results

Summary of Contents for DNS-722-4

Reviews:

Related manuals for DNS-722-4

Brands by name

Popular brands

D-Link DNS-722-4, Product Manual

Search results

Summary of Contents for DNS-722-4

Reviews:

Related manuals for DNS-722-4

Brands by name

Popular brands