D-Link DNS-722-4 Product Manual Download

Page: 73 / 93

D-Lnk DNS-722-4/DNS-726-4 User Manual

Secton - Configuraton

Multi-NVR Viewer Application

PTZ Camera

Control:

Zoom:

Minimize:

Exit:

Digital Zoom:

Play / Stop/

Drop:

Information

Display

Window:

Playback:

Snapshot:

Remote I/O:

Control the camera view by utilizing the PTZ
camera control panel to adjust the camera’s view.
This is only available with cameras that support
the PTZ function.

Click the + or - button to zoom in or zoom out the
view.

Minimize the Remote Live Viewer window.

Shut down the application.

Click the icon to digitally zoom in or out.

Select the camera/video and click this button to
play/stop/disconnect a particular channel.

Display video information including server name,
video current status, and bit rate for a selected
channel.

View playback video remotely.

Select the snapshot function to capture a specific
video image immediately.

Users can remotely adjust the external I/O
device.

Step 1: Please insert the product CD.
Step 2: Install the

Live.View

application from CD.

Step 3: Run

“Live.View”

application from the Start -> Programs -> D-Link -> Multi-NVR Viewer

Summary of Contents for DNS-722-4






























































































Search results

Summary of Contents for DNS-722-4

Reviews:

Related manuals for DNS-722-4

Brands by name

Popular brands

D-Link DNS-722-4, Product Manual

Search results

Summary of Contents for DNS-722-4

Reviews:

Related manuals for DNS-722-4

Brands by name

Popular brands