D-Link DNR-326 User Manual Download Page 12

Page: 12 / 86

D-Link DNR-326 User Manual

Section 1 - Product Overview

Rear Panel (Connections)

COMPONENT

DESCRIPTION

Cover Lock

This lock is used to remove the cover when unlocked. Locking it will restrict the removal of the top cover.

Cooling Fan

The cooling fan is used to cool the hard drives and features speed control. When the unit is first powered on, the

fans rotate at a low speed. The fans will rotate at a high speed when the temperature rises above 49 °C.

Reset Button

Press this button for more than 5 seconds to reset the unit to the factory defaults.

Power Receptacle

Connect the supplied power cord to the receptacle.

Gigabit Ethernet Port

Use the Gigabit Ethernet Port to connect the device to the local network. The port is equipped with both a LAN

LINK (R) and Traffic LED (L) to indicate connectivity and traffic respectively to the local LAN

Security Lock

This lock can be used to tie the DNR-326 to the desk to prevent theft. Cables are sold separately.

Cover Lock

Cooling Fan

Security Lock

Reset Button

Cable Hook

Power Receptacle

Gigabit Ethernet Port

Summary of Contents for DNR-326























































































Search results

Summary of Contents for DNR-326

Reviews:

Related manuals for DNR-326

Brands by name

Popular brands

D-Link DNR-326, User Manual

Search results

Summary of Contents for DNR-326

Reviews:

Related manuals for DNR-326

Brands by name

Popular brands