20
D-Link DNR-326 User Manual
Section 3 - Configuration
Network Setup
DHCP:
Static IP:
IP Address:
Subnet Mask:
Gateway IP
Address:
DNS1:
DNS2:
PPPoE
Settings:
DHCP server:
Select this connection if you have a DHCP server
running on your network and would like a dynamic
IP address to be automatically updated to your NVR.
You may obtain a static or fixed IP address and
other network information from your network
administrator for your NVR. A static IP address will
simplify access to your NVR in the future.
The fixed IP address.
The default value 255.255.255.0 is used to determine
if the destination is in the same subnet.
The gateway forwards frames to destinations in a
different subnet. Invalid gateway settings may cause
the failure of transmissions to a different subnet.
Primary domain name server that translates names
to IP addresses.
Secondary domain name server to backup the
primary one.
Enable this setting if your ISP (DSL service) is using
PPPoE. You may already have a Username and
Password provided by your ISP, or you may need
to contact your ISP. The connection status will be
determined automatically by the system.
Enable or disable the DHCP server. If your network
doesn’t have DHCP server, enable NVR DHCP server
for easier local network setup.
Network Setup allows you to configure the LAN settings for your NAS device.
Summary of Contents for DNR-326
Page 1: ......
