13
D-Link DNR-326 User Manual
Section 2 - Getting Started
When first powered on, during the initial boot sequence, the device will wait to be assigned an IP address via DHCP. If it does
not receive a DHCP-assigned IP address, the Auto-IP process will assign a 169.254.xxx.xxx address to the device If you want to
change the IP address before login or are unable to connect to the NVR IP address, you can use the NVR Search Utility provided
on the product CD to locate the device on your network and make any needed changes.
D-Link NVR Search Utility
Network Video
Recorder:
Refresh:
Configuration:
LAN:
Apply:
Drive Mapping:
Available Drive
Letters:
About:
Exit:
The D-Link NVR Search Utility displays any NVR devices it detects on the
network.
Click to refresh the device list.
Click
Configuration
to access the Web-based configuration of the NVR.
Configure the LAN Settings for the NVR here.
Click
Apply
to save and activate the changes to the LAN Settings.
Volumes available for mapping are displayed here.
Select an available drive letter. Click
Connect
to map the selected volume.
Click
Disconnect
to disconnect the selected mapped volume.
Click
About
to view the software version of the NVR Search Utility.
Click
Exit
to close the utility.
Summary of Contents for DNR-326
Page 1: ......
