D-Link DNR-2060-08P User Manual Download Page 89

Page: 89 / 99

D-Link DNR-2060-08P User Manual

Section 5: Remote Operation

Playback Video

Remote Playback

The remote monitoring software allows users to either view recorded video from the NVR, or

from the hard disk drive of the PC.

To access the Playback screen, click

Play

button on the main window toolbar.

There are three tabs in the Playback screen:

Remote Playback

Local Playback

, and the

Verify

tab.

Remote Playback

allows users to playback from the NVR.

Local Playback

enables users

to playback a recorded video file stored on the hard disk drive of the PC.

Verify

is provided for

users to authenticate if the exported video is altered. During either remote playback or local

playback the NVR can simultaneously record while displaying from the PC.

The remote monitoring software allows users to either view recorded video from the NVR, or

from the hard disk drive of the PC.

To access the Playback screen, click the

Play

button on the main window toolbar.

Summary of Contents for DNR-2060-08P




































































































Search results

Summary of Contents for DNR-2060-08P

Reviews:

Related manuals for DNR-2060-08P

Brands by name

Popular brands

D-Link DNR-2060-08P, User Manual

Search results

Summary of Contents for DNR-2060-08P

Reviews:

Related manuals for DNR-2060-08P

Brands by name

Popular brands