D-Link DNR-2060-08P User Manual Download Page 18

Page: 18 / 99

D-Link DNR-2060-08P User Manual

Section 2: System Setup

Function Keys

This section describes the function keys for normal operation, on the front panel of the NVR.

POWER

After the power cord is correctly connected,press this key to switch power on.

Press and hold this key to quick shutdown the NVR.

CHANNEL

In both Live and Playback modes, press the

CHANNEL

key to view the corresponding

video in full-screen. The number of the

CHANNEL

keys corresponds to the number of

cameras supported by the unit.

In Dome Control mode, the key “

” is used to access the

Set

preset menu; the keys

“

” ~ “

” are for quick access of preset points

COPY

In Playback mode, press this key to select the start and end time of the export video.

Refer to section Video Export for detailed information.

DOME

Press the key to enter Dome Control mode. Please refer to Section Dome Control for

detailed controlling operation.

MODE

Press repeatedly to select desired main monitor display format. According to the

monitor displaying type, there are several available viewing modes: full-screen,

2-windows, and 8-windows. Refer to section Viewing Modes for detailed information.

PLAY

Press this key to switch between live image and playback video.

Note:

The video of latest 5~10 minutes cannot be played back because the video is still

saved in the buffer.

FREEZE

Press

FREEZE

while viewing live image, the live video will be frozen. The date / time

information shown on the monitor will continue updating, as well as the recording

of video. Press

FREEZE

again to return to live mode. Press

FREEZE

while playing the

recorded video, the playback video will be paused. Press

LEFT

RIGHT

to move the

recorded video reverse / forward by single step. Press

FREEZE

again to continue

playing video.

SEQ (Sequence)

Press to start automatic sequence display of video from all installed cameras.

SEARCH

In both Playback and Live mode, press

SEARCH

to enter the Search menu for

searching and playing back recorded video by date / time, event, or text.

MENU

Press this key to enter the OSD setup menu.

Summary of Contents for DNR-2060-08P




































































































Search results

Summary of Contents for DNR-2060-08P

Reviews:

Related manuals for DNR-2060-08P

Brands by name

Popular brands

D-Link DNR-2060-08P, User Manual

Search results

Summary of Contents for DNR-2060-08P

Reviews:

Related manuals for DNR-2060-08P

Brands by name

Popular brands