Appendix
A - Technical Specifications
D-Link DMS-1100 Series User Manual
108
Features
L2 Features
Supports up to 16K MAC address
Jumbo frame: Supports up to 9KB
IGMP snooping: Supports 192 multicast
group (shared with MLD Snooping)
MLD Snooping: Supports 192 multicast
group (shared with IGMP Snooping)
802.1D Spanning Tree
802.1s MSTP
ERPS
Loopback Detection
802.3ad Link Aggregation:
- DMS-1100-10TS: up to 8 groups per
device and 8 ports per group
- DMS-1100-10TP: up to 8 groups per
device and 8 ports per group
Port mirroring
L3 Features
Support 1 IPv4 and 1 IPv6 interfaces
VLAN
802.1Q VLAN standard (VLAN Tagging)
Up to 4094 static VLAN groups
Asymmetric VLAN
Management VLAN
Auto Voice VLAN
QoS (Quality of Service)
Priority queue mapping by :
-
802.1p
-
CoS
Up to 8 queues per port
Supports Strict in queue handling
Bandwidth Control
Security
Trusted Host
Traffic Segmentation
D-Link Safeguard Engine
Broadcast Storm Control
SSL: Support v1/v2
OAM
Cable Diagnostics
Reset button (reset to factory default)
Management
Web-based GUI
SNMP support
DHCP client
Trap setting for destination IP, system
events, fiber port events, twisted-pair port
events
Password access control
Web-based
configuration
backup
/
restoration
Web-based firmware backup/restore
Firmware
upgrade
&
Web-based
management
Reset, Reboot
D-Link Green Technology
Power Saving: Enabled by default to save
power:
- By Link Status: Drastically save power
when the switch port link is down. For
example,
no
PC
connection or
the
connected PC is powered off.
- By LED Shut-Off: LEDs can be turned
on/off by port or system through schedule.
- By Port Shut-Off: Each port on the system
can be turned on/off by schedule.
- By System Hibernation: System enters
hibernation by schedule. In this mode,
switches save most power since main
chipsets (both MAC and PHY) are disabled
for all ports, and energy required to power
the CPU is minimal.
