D-Link DMS-1100 Series User Manual
18
The above image is the Web-based Management screen. The three main areas are the
Tool Bar
on top, the
Function Tree
, and the
Main Configuration Screen
.
The
Tool Bar
provides a quick and convenient way for essential utility functions like firmware and
configuration management.
By choosing different functions in the
Function Tree
, you can change all the settings in the
Main
Configuration Screen
. The main configuration screen will show the current status of your Switch by clicking
the model name on top of the function tree.
At the upper right corner of the screen the username and current IP address will be displayed.
Under the username is the
Logout
button. Click this to end this session.
NOTE:
If you close the web browser without
clicking the
Logout
button first, then it will be seen
as an abnormal exit and the login session will still
be occupied.
Click the D-Link logo at the upper-left corner of the screen to be redirected to the local D-Link website.
Tool Bar > Save Menu
The Save Menu provides Save Configuration and Save Log functions.
Figure 4.5 – Save Menu
Save Configuration
The Save Configuration page allows user to save the configuration changes to the S witch
’s non-volatile
RAM.
Figure 4.6 – Save Configuration
The fields that can be configured for
Save Configuration
are described below:
Item
Description
Destination
Select the destination to save the configuration to.
Startup-config
Check the box to enable the startup configuration function.
Table 4.1
Click
Apply
to make the configurations take effect.
