DIR-882
AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Configuring via Web-based Interface
If the SNMP manager operates over SNMPv3, create a read-only user which will be used by the
SNMP manager to get data on the device. To do this, in the
Users
section, click
the
ADD
button (
).
Figure 169. The window for adding a user.
In the opened window, specify the needed parameters:
Parameter
Description
Name
Specify a username for access from the SNMP manager.
Authentication protocol
Select a required authentication method from the drop-down list or
leave the
None
value if authentication is not required.
Authentication
password
Specify a password for user authentication from the SNMP manager.
The field is displayed if the
MD5
or
SHA
value is selected from the
Authentication protocol
drop-down list.
Encryption protocol
Select a required encryption method from the drop-down list or
leave the
None
value if encryption is not required. The list is
displayed if the
MD5
or
SHA
value is selected from the
Authentication protocol
drop-down list.
Encryption key
Specify an encryption key for data exchange between the SNMP
agent and SNMP manager. The field is displayed if the
DES
or
AES
value is selected from the
Encryption protocol
drop-down list.
MIB subtree
Specify a MIB element which will be available to the SNMP
manager.
Click the
SAVE
button.
Page
216
of 303
