D-Link DIR-882 User Manual Download Page 197

Page: 197 / 303

DIR-882

AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with

3G/LTE Support and 2 USB Ports

User Manual

Configuring via Web-based Interface

Parameter

Description

Path

Locate data of the Transmission client. To do this, click the

Search

icon (

), select the needed value, and click the

SELECT

button.

Directory

The folder on the USB storage where data of the Transmission client
will be stored.

Enable download queue

Move the switch to the right if you want to limit the number of
simultaneous downloads. Upon that the

Download queue size

field will be displayed.
Move the switch to the left not to limit the number of simultaneous
downloads.

Download queue size

The maximum number of simultaneous downloads. By default, the
value

is specified.

Peer limit

The maximum number of the service users from which you can
download files.

Enable download speed

limit

Move the switch to the right to limit the maximum file download
speed. In the

Download speed limit

field displayed, specify the

maximum value of speed (KBps).
Move the switch to the left not to limit the maximum download
speed.

Use uTP

Move the switch to the right to enable μTP (

Micro Transport

Protocol, a transport protocol for file sharing

). Such a setting can

increase the load on the router.
Move the switch to the left to disable μTP.

Web-based interface

port

The port on which the web-based interface of the Transmission
client is available.

Authorization

Enable

Move the switch to the right if you want the Transmission client to
request for username and password when accessing its web-based
interface. Then fill in the

Username

and

Password

fields.

Username

The username to access the web-based interface of the Transmission
client.

Password

The password to access the web-based interface of the Transmission
client.

After specifying the needed parameters, click the

APPLY

button.

Page

197

of 303

Summary of Contents for DIR-882
















































































































































































































































































































Search results

Summary of Contents for DIR-882

Reviews:

Related manuals for DIR-882

Brands by name

Popular brands

D-Link DIR-882, User Manual

Search results

Summary of Contents for DIR-882

Reviews:

Related manuals for DIR-882

Brands by name

Popular brands