DIR-882
AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Configuring via Web-based Interface
In order to enable the SNMP agent, in the
Configuration
section, move the
Enable SNMP
switch to the right. Then specify the needed parameters.
Parameter
Description
Configuration
Remote subnet
The IP address of the remote subnet where the SNMP manager is
located.
Hostname
A name of the router for identification in the SNMP manager.
The contact information
for the administrator
Additional information used to contact the administrator of the
router.
System location
Additional information used to locate the router.
After specifying the needed parameters, click the
APPLY
button.
In order to disable the SNMP agent, in the
Configuration
section, move the
Enable SNMP
switch to the left and click the
APPLY
button.
If the SNMP manager operates over SNMPv2c, create a read-only community which will be used
by the SNMP manager to get data on the device. To do this, in the
Communities
section, click the
ADD
button and specify the community name in the line displayed. Then click the
APPLY
button.
To remove a community, click the
Delete
icon ( ) in the relevant line. Then click the
APPLY
button.
Page
215
of 303
